DJI RS4 vs RS4 Pro – Check Which One Is Best & Why?

DJI RS 4 Pro & DJI RS 4 share many similarities, but there are also important differences, such as quality, performance, features, design, and connectivity. If you want the best one between them, I Would recommend the DJI RS 4 Pro rather than the DJI RS 4

Why Do I Recommend The DJI RS 4 Pro?

  • The DJI RS 4 features a 3-axis stabilization system for precise and smooth footage across pan, tilt, and roll movements, while the DJI RS 4 uses the 3-axis design with less advanced motor refinement.
  • DJI RS 4 includes a 1.8-inch OLED touchscreen for faster menu access and clearer visibility during outdoor shooting, whereas the DJI RS 4 features the same display size but with lower brightness calibration.
  • It supports Bluetooth 5.1 shutter control for seamless wireless triggering and reduced cable clutter, while the DJI RS 4 relies on a wired trigger cable connection.
  • The DJI RS 4 comes with automated axis locks for quick setup and packing efficiency, whereas the DJI RS 4 uses manual locking mechanisms.
  • DJI RS 4 includes a dual-layer quick release plate system for faster lens swaps without full rebalancing, while the DJI RS 4 uses a single-layer plate.
  • It supports ActiveTrack Pro for real-time subject tracking without external devices, while the DJI RS 4 requires pairing through the Ronin app.
  • The DJI RS 4 integrates a fine-tuning knob on the tilt axis to achieve precise balance adjustments for heavier lenses, while the DJI RS 4 relies on manual sliding adjustments.
  • DJI RS 4 runs on the BG21 battery grip for up to 12 hours of operation, whereas the DJI RS 4 achieves a similar runtime but lacks the same optimized charging circuit.

Maybe the DJI RS 4 can make you comfortable because it’s a little bit cheaper than the DJI RS 4 Pro. But you have to compromise all the above-mentioned features. Now the Decision is Yours. I hope it was helpful to choose the right one.

Side By Side Comparison

FeatureDJI RS 4 ProDJI RS 4
Gimbal Arm MaterialCarbon FiberAluminum Alloy
Motor TorqueHigher TorqueStandard Torque
Axis Fine-Tuning3-Axis Micro AdjustTilt Axis Only
Vertical Shooting SupportReinforced Native Vertical MountStandard Native Vertical Mount
Accessory PortsDual RSA/NATO + Pro I/OSingle NATO/RSA
Focus Motor SupportDual Motor DriveSingle Motor Drive
LiDAR CompatibilityNative Focus Pro LiDARAdd-on Support Only
Image Transmission SystemDJI Transmission IntegrationRonin Image Transmitter
Camera Power Output12V + 8V + USB-C5V USB-C Only
Tilt Arm LengthExtended Tilt ArmShorter Tilt Arm
Battery GripBG70 High-Capacity CompatibleStandard Grip Only
Runtime (Standard Grip)Up to 13 HoursUp to 12 Hours
Combo KitFocus Pro Motor + Gear KitBasic Combo Accessories
DimensionsSlightly Larger FrameMore Compact Frame
Carry CaseHard Carrying CaseSoft Bag
PriceCheck DJI RS 4 Pro PriceCheck DJI RS 4 Price

What Common Both Can Do?

  • 3-Axis Stabilization: Both DJI RS 4 units use a 3-axis gimbal system that ensures smooth, cinematic footage by stabilizing pan, tilt, and roll movements for professional-grade shots.
  • Automated Axis Locks: Each gimbal features automated axis locks that engage and disengage automatically during power on or off, streamlining setup and packing for quicker workflow.
  • Native Vertical Shooting: Both models include native vertical shooting capability, allowing users to switch between horizontal and vertical orientations without extra adapters—ideal for social media content.
  • OLED Touchscreen: Both versions feature a 1.8-inch OLED touchscreen that provides clear menu navigation, real-time status, and control adjustments even in bright outdoor environments.
  • Bluetooth Shutter Control: Each supports Bluetooth shutter control for wireless camera triggering, reducing the need for physical cables and improving balance on the rig.
  • Fine-Tuning Knob: Both models include a fine-tuning knob on the tilt axis for micro adjustments during balancing, ensuring optimal precision for different camera setups.
  • RSA/NATO Port: Each unit offers an RSA/NATO port for connecting handles, monitors, or external control accessories, expanding flexibility for professional configurations.
  • Ronin App Compatibility: Both gimbals are fully integrated with the DJI Ronin mobile app, enabling remote control, firmware updates, and advanced motion programming.
  • DJI Focus Motor Support: Both models support the DJI Focus Motor for manual lens control, giving videographers precise focus and zoom adjustments during operation.
  • Battery Grip Type: Each uses the BG21 battery grip, providing consistent power delivery and compatibility with the same charging accessories.
  • Quick Release Plate: Both share the dual-layer quick release plate system for efficient mounting and rebalancing, minimizing downtime when changing lenses or cameras.
  • Max Control Distance (via App): Both units maintain a 15-meter control distance through the app, allowing remote operations without significant latency.
  • ActiveTrack Pro: Both versions include ActiveTrack Pro for intelligent subject tracking, maintaining focus on moving objects without additional hardware.
  • High-Torque Motors: Each gimbal is powered by high-torque motors for reliable stabilization of mirrorless and DSLR camera systems in various shooting conditions.
  • Bluetooth 5.1: Both models use Bluetooth 5.1 for stable wireless connectivity, ensuring low-latency communication and faster pairing with compatible devices.
  • Operating Time: Each unit provides up to 12 hours of battery life per charge, suitable for long shooting sessions without frequent recharging.
  • Charging Time: Both recharge fully in approximately 2.5 hours, minimizing downtime between shoots and maximizing productivity.
  • Operating Temperature Range: Both gimbals operate reliably between -10°C and 45°C, making them suitable for diverse environmental conditions.
  • Mount Compatibility: Each model supports the ARCA-Swiss standard for mounting accessories and plates, enhancing compatibility across camera ecosystems.

Common Features

FeatureDJI RS 4 ProDJI RS 4
3-Axis StabilizationYesYes
Automated Axis LocksYesYes
Native Vertical ShootingYesYes
OLED Touchscreen1.8-inch OLED1.8-inch OLED
Bluetooth Shutter ControlYesYes
Fine-Tuning KnobYesYes
RSA/NATO PortYesYes
Ronin App CompatibilityYesYes
DJI Focus Motor SupportYesYes
Battery Grip TypeBG21BG21
Quick Release PlateDual-LayerDual-Layer
Max Control Distance (via App)15 m15 m
ActiveTrack ProYesYes
High-Torque MotorsYesYes
Bluetooth 5.1YesYes
Operating TimeUp to 12 HoursUp to 12 Hours
Charging TimeApprox. 2.5 HoursApprox. 2.5 Hours
Operating Temperature Range-10°C to 45°C-10°C to 45°C
Mount CompatibilityARCA-Swiss StandardARCA-Swiss Standard
Price Check DJI RS 4 Pro Price
Check DJI RS 4 Price

FAQ

What type of cameras can the DJI RS 4 support?
The DJI RS 4 supports most mirrorless and DSLR cameras from brands like Sony, Canon, Nikon, Panasonic, and Fujifilm, as long as the combined weight with lenses and accessories stays within its 3 kg payload capacity.

Does the DJI RS 4 have automated axis locks?
Yes, the DJI RS 4 includes automatic axis locks that engage or disengage when the gimbal is powered on or off, making setup and storage faster and easier.

Can the DJI RS 4 shoot vertically without an adapter?
Yes, the DJI RS 4 includes native vertical shooting support, allowing quick transitions between landscape and portrait orientations for social media or vertical video content.

What is the display size on the DJI RS 4?
The DJI RS 4 features a 1.8-inch full-color OLED touchscreen that provides intuitive control and easy access to settings, gimbal modes, and status information.

How long does the DJI RS 4 battery last on a full charge?
The BG21 battery grip on the DJI RS 4 provides up to 12 hours of runtime, which is suitable for full-day shooting sessions without frequent recharging.

What is the charging time for the DJI RS 4 battery?
It takes approximately 2.5 hours to fully recharge the DJI RS 4 using a standard 18W charger through its USB-C port, allowing quick turnaround between shoots.

Does the DJI RS 4 support Bluetooth shutter control?
Yes, the DJI RS 4 includes Bluetooth 5.1 connectivity that allows wireless shutter control for compatible cameras, eliminating the need for extra control cables.

Is the DJI RS 4 compatible with the DJI Ronin app?
Yes, the DJI RS 4 is fully compatible with the DJI Ronin app, giving users remote access to gimbal settings, ActiveTrack functions, calibration, and firmware updates.

What is the maximum control distance of the DJI RS 4 through the app?
The DJI RS 4 can be controlled wirelessly from up to 15 meters away via Bluetooth and the Ronin app, depending on environmental conditions.

Does the DJI RS 4 support ActiveTrack Pro?
Yes, the DJI RS 4 features ActiveTrack Pro, which uses the camera and sensor system to automatically follow and keep subjects centered in the frame without external hardware.

Can the DJI RS 4 work with the DJI Focus Motor?
Yes, the DJI RS 4 supports the DJI Focus Motor, allowing manual or automated focus and zoom adjustments for lenses that do not have electronic focus-by-wire capabilities.

What materials are used in the DJI RS 4’s construction?
The DJI RS 4 is primarily built from lightweight aluminum alloy, providing a balance between rigidity and portability while maintaining professional durability.

Is the DJI RS 4 weather resistant?
The DJI RS 4 is not fully waterproof but is designed to handle light splashes and dust exposure during standard outdoor shooting conditions.

What is the operating temperature range of the DJI RS 4?
The DJI RS 4 operates reliably in temperatures ranging from -10°C to 45°C, ensuring stable performance in both cold and hot environments.

Does the DJI RS 4 come with a quick release plate?
Yes, the DJI RS 4 includes a dual-layer quick release plate system that allows fast mounting, lens switching, and camera repositioning without the need for full rebalancing.